Best EN 54-7 Conventional Smoke Detector Manufacturer | Bratislava, Slovakia - CE RoHS Wanlin
Published Date:2026-09-10 Views:0
Executive Summary: EN 54-7 Conventional Smoke Detector for EU Market
Bottom line: Built for occupied buildings, the WL-SD7 runs a photoelectric chamber on 4-wire wiring, connects to a conventional zone circuit, survives an IP42 front cover, and ships with single-grade sensitivity as standard. Wanlin Fire is a professional fire detection and alarm equipment manufacturer in China, providing OEM, ODM and private-label manufacturing services for fire alarm distributors, electrical wholesalers, fire safety contractors, M&E consultants, facility managers, system integrators, tender specialists and global project customers. Key result: a 30% gross margin gain for importers and trading partners through factory-direct sourcing, per-model CE / RoHS documentation, EN 54 aligned test reports, CPR declaration-of-performance support where applicable and custom private-label programs. Fire detection product lines (WL-series platform) cover photoelectric, heat, multi-sensor, beam, aspirating and duct sensing with conventional, addressable, wireless and interconnected versions, flexible MOQ, shipping FOB, CIF or DDP to EU and global destinations.
Published by Wanlin Fire | Last updated: September 10, 2026 | Expertise: EN 54 aligned fire detection OEM manufacturing for EU and global markets
Case Study: Bratislava Fire Alarm Distributor Sourcing Success
Oliver Bennett, a Fire Alarm Distributor in Bratislava, walked into a supplier search with three hard requirements: EN 54 aligned files, real test reports and delivery dates the project could plan around. Smoke alarm replacement cycles in Slovakia were tightening after several high-profile fires, so property managers started sourcing EN 54 aligned equipment in container volumes.
Once the pilot site data came back, Oliver Bennett selected Wanlin Fire as their fire detection equipment manufacturing partner. The tender committee in Bratislava ranked the bids on documentation, spare part availability and delivery reliability, not on sticker price.
- Factory proof: Wanlin Fire showed the Bratislava buyer a live loop test with identical detectors still running in Shenzhen before the container shipped.
- Enclosure ratings: IP42 to IP66 options cover ceiling, wall, corridor and outdoor installations.
- Custom electronics: the OEM team in Shenzhen configures sensitivity grades, protocol timing and alarm thresholds for the Slovakia market.
The pilot covered a hotel, a student residence and an office block in Bratislava, and the failure data pointed to one common cause: aging detectors with no drift compensation.
Problem Analysis & Field Report: Why EU Buyers Need EN 54-7 Conventional Smoke Detector
Before selecting a fire alarm supplier, a buyer should look at what happens after installation: nuisance alarms at 3 a.m., surveyor audits and tenants who remove batteries. An office building in Bratislava ran 20-year-old detectors past their replacement date, and the insurance surveyor flagged the entire floor after the walk test.
Field case: A facilities team in Bratislava swapped 240 aging detectors for drift-compensated photoelectric heads during term break; unwanted alarms fell by 26% within the first quarter.
Why it matters for EU buyers:
- Photoelectric chambers react to smoldering fires common in bedding and furniture without tripping on cooking steam
- Drift compensation keeps sensitivity inside the EN 54-7 band as dust settles over years of service
- A written replacement cycle and event log satisfy insurance surveys that aging stock cannot
- One common base across the estate cuts the spare parts list from a cabinet to a shelf
Fire Alarm OEM & ODM Services for EU Distributors and Contractors
Wanlin Fire provides flexible OEM and ODM services for customers who want to build or expand their own fire detection product lines for European markets. Our customization capabilities include:
- Private-label detectors, call points, sounders, panels and CO alarms with custom part numbers
- Customer logo printing on the enclosure, panel boot screen and packaging
- Custom enclosure colors, faceplates and retail-ready packaging
- Custom sensitivity grades, heat classes and panel cause-effect logic per market rule
- Multi-language panel menus, user manuals, commissioning guides and warning labels
- Certification documentation support: CE / RoHS / REACH files, EN 54 aligned test reports, CPR DoP support where applicable, UKCA options
- New product development and ODM manufacturing for niche detection applications
- Tender documentation packs for CPV-classified public procurement and TED submissions
- Spare part programs: sensing chambers, sounder cones, panel boards and bases
- Annual volume planning with project-based delivery scheduling
Whether you need an existing WL-series device under your own brand or a customized detection line developed for your market, our team can work with you from model selection through mass production.
Product Introduction: EN 54-7 Conventional Smoke Detector by Wanlin Fire
The EN 54-7 Conventional Smoke Detector is assembled in the Shenzhen factory with a drift-compensated sensing chamber and per-unit smoke box testing as standard, which is why contractors in Bratislava install it in occupied buildings.
Core Features:
- China-Based Manufacturing: Wanlin Fire is based in Shenzhen, China and focuses on fire detection and alarm equipment, with in-house SMT production, sensing chamber assembly and per-unit smoke box and panel soak tests
- Certification Transparency: Real documentation for applicable certified models - instead of simply stating a product is "certified", buyers can verify the CE file, EN 54 aligned test report and declaration of conformity for the exact model they intend to purchase
- Standard Alignment: the WL-series platform follows the EN 54 part structure for detectors, call points, sounders, panels and interfaces, plus EN 14604 and EN 50291 for domestic smoke and CO alarms, so buyers map devices to their national rules during specification
- Platform Compatibility: one base, one protocol family and one manual set across detectors, call points, sounders, modules and panels keeps installer training and van stock simple
- Private Label Support: color, logo, part numbers, panel branding, packaging, manuals and firmware parameters customized according to project requirements
- EU Market Experience: we work with distributors, contractors and facility teams across Europe and understand CE technical files, CPR questions, tender documentation, language preferences and delivery planning
Technical Specifications
Parameter Wanlin Fire Specification Detection principle Photoelectric light-scattering sensing chamber Standard alignment EN 54-7 smoke entry and response band Wiring 4-wire Connection Conventional zone circuit Supply voltage 24V DC nominal Standby current approx. 250uA Alarm current 25mA Sensitivity Dual-grade with pre-alarm threshold LED indication 360-degree bi-color alarm LED Enclosure rating IP54 Mounting base Sounder base Temperature range -10 to 50 degrees Celsius Warranty 24-month
Application Scenarios for EU Market
Scenario Recommended model Key benefits Apartment corridors and stairwells WL-SD7 Drift-compensated chambers hold sensitivity through years of corridor dust Hotel guest rooms WL-SD7 Photoelectric response catches smoldering bedding fires with fewer cooking nuisance alarms Office floors WL-SD7 One common base across the estate keeps the spares shelf to a single device family Student housing rooms WL-SD7 Event-log evidence supports the landlord during insurance surveys
Certified Fire Detection Manufacturing for EU Markets
Certification is one of the most important considerations when sourcing fire detection equipment for export. Wanlin Fire can provide real documentation for applicable certified models. Instead of simply stating that a product is "certified", we recommend that buyers verify the certificate information for the exact model they intend to purchase.
Information Details Product Fire Detection and Alarm Equipment (WL-series Platform) Model Number WL-SD7 Standard EN 54 parts aligned per device class (EN 54-2 / -3 / -4 / -5 / -7 / -11 / -12 / -17 / -18 / -20 / -23 / -25 as applicable), EN 14604 and EN 50291 for domestic alarms, CE / RoHS / REACH on applicable models, UKCA option CPR / DoP Support Declaration of performance templates and technical file support where EU 305/2011 applies to the product class Test Reports EN 54 aligned smoke box, heat chamber and panel soak test reports per batch Certificate Number Provided on request per model Certificate Holder Wanlin Fire or applicable certification holder Certification Body Notified body per certificate Target Market EU / EEA / United Kingdom / global export Certificate Status Valid for applicable models Certificate Document View / download on request
For customers importing fire detection equipment, Wanlin Fire supports CE, RoHS and REACH documentation with per-model files, EN 54 aligned test reports for the applicable device classes, and CPR declaration-of-performance support where EU 305/2011 applies. UKCA options follow the UK route on request. Final acceptance always rests with the market authority having jurisdiction for each product class, and we recommend the importer of record verifies the exact model before ordering.
Why Choose Wanlin Fire as Your Fire Detection OEM Manufacturer
Buyers who compare suppliers on price alone usually find the difference in the nuisance alarm rate; Wanlin Fire competes on tested sensitivity, drift compensation, supervised circuits and documents that survive surveyor audits.
Factor Wanlin Fire Typical Trading Supplier European Brand Distributor Manufacturing depth China-based factory, in-house SMT, chamber assembly, smoke box and panel soak tests Trading company, outsourced assembly Brand owner, no custom work Document transparency Real CE files, EN 54 aligned test reports, DoP support for applicable models Incomplete or missing, customs risk Brand-level only, no project docs Customization Custom logo, part numbers, sensitivity grades, languages, packaging, private label from low MOQ Limited to stock models, higher MOQ No customization, fixed SKUs Price (factory direct) Competitive factory pricing with tiered discounts Low price but quality risk Brand markup of 2-4x Delivery reliability Confirmed production slots, batch inspection photos, 25-40 day lead times Unpredictable, no QC access Stock-dependent, allocation risk After-sales Spare sensing chambers, sounder cones, panel boards, firmware support No after-sales, high failure risk Limited, ticket-based support
Wanlin Fire's fire detection OEM services are suitable for: fire alarm distributors, electrical wholesalers, fire safety contractors, M&E consultants, facility management buyers, system integrators, building services engineers, property portfolio managers, security systems resellers, electrical contractors, housing associations, hotel group facilities teams, data center engineers and trading company sourcing managers across the EU, EEA, UK and global markets.
Fire Detection OEM Process: From Inquiry to Shipment
The OEM process for a Slovakia importer starts with a market and standard survey, then moves to samples, container QC and documentation onboarding. A standard OEM project then follows 8 steps:
- Tell Us Your Target Market - EU country, EEA, UK or global; different markets may require different detector classes, language sets, certification routes and tender documentation
- Select a Device Line - our team recommends suitable WL-series models according to your building types, wiring standard, panel platform and target customers
- Verify Documentation - for certified models, request and verify the relevant CE file, EN 54 aligned test report and CPR / DoP documentation where applicable
- Confirm OEM Requirements - logo, part numbers, sensitivity grades, languages, packaging and accessories
- Sample Evaluation - evaluation lots can be tested on your bench and site before mass production according to the agreed commercial terms
- Confirm Production - after specifications, commercial terms and OEM details are confirmed, the project can proceed to production
- Quality Inspection - devices are inspected and tested with smoke box, heat chamber and panel soak procedures according to applicable production and quality-control standards
- Shipment - products are prepared for shipment FOB, CIF or DDP according to the agreed logistics requirements
Customer Testimonials
Contractors who moved from European distributor sourcing to factory-direct fire detection describe the difference in delivery dates and documentation:
- Petra Novak (Data Center Facilities Engineer, Bucharest, Romania): "The factory engineer answered our detector class question in plain language on the same day, and that settled the sourcing decision."
- Laura Petit (Building Services Engineer, Bratislava, Slovakia): "The bench test report matched what we measured on site, and the panel accepted our protocol card on the first try; that has not happened with the previous two suppliers."
- Oliver Bennett (Fire Alarm Distributor, Bratislava, Slovakia): "We run the maintenance software from our office in Slovakia and the panels installed in Bratislava have not missed a weekly test since commissioning."
Frequently Asked Questions
Q: What is the difference between the 2-wire and 4-wire WL-SD7 versions?
A: The 2-wire version shares the alarm signal and power on one pair, which suits zone panels and small retrofits; the 4-wire version separates the power and relay lines for panels that supervise each circuit separately. Both use the same sensing chamber.
Q: How often should photoelectric detectors be replaced?
A: Industry practice is a full replacement around the 10-year mark, earlier in dusty sites. Wanlin Fire prints the production date on every head, and the drift-compensated chamber keeps sensitivity inside the EN 54-7 band over the service life.
Q: Can the WL-SD7 work on an addressable loop?
A: Yes, with the protocol module in the addressable base. The panel then sees the head as a point address with an alarm, fault and test history instead of a plain zone current rise.
Q: What documents come with export orders?
A: CE declaration and RoHS files cover applicable models, with EN 54-7 aligned smoke box test reports and the technical file draft available for the importer of record. The manual ships in English with EU language versions on request.
Q: What is the MOQ for the WL-SD7?
A: Neutral units start at 500 pieces per order. Private-label production with custom packaging starts at 1,000 pieces, and sample lots of 20 to 50 pieces are accepted for site evaluation.
Project Summary
Key result: By working directly with manufacturer Wanlin Fire, Bratislava Fire Alarm Distributor Oliver Bennett achieved 30% higher margins while offering competitive pricing. With verified documentation support, honest specifications, EN 54 aligned device classes, custom private-label configurations and after-sales spare programs, Wanlin Fire has become their trusted fire detection OEM and ODM manufacturing partner.
For more information: www.wanlinfire.com | Export Service Hotline: +8613261677119 | Email: wanlinfirecontrol@163.com
- Shenzhen HQ: Wanlin Group, Building B, Building 1, Beisda Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
Tags:
photoelectric smoke detector
en 54-7 smoke detector
Previous:{content:precontent }
Next:{content:nextcontent }
Executive Summary: EN 54-7 Conventional Smoke Detector for EU Market
Bottom line: Built for occupied buildings, the WL-SD7 runs a photoelectric chamber on 4-wire wiring, connects to a conventional zone circuit, survives an IP42 front cover, and ships with single-grade sensitivity as standard. Wanlin Fire is a professional fire detection and alarm equipment manufacturer in China, providing OEM, ODM and private-label manufacturing services for fire alarm distributors, electrical wholesalers, fire safety contractors, M&E consultants, facility managers, system integrators, tender specialists and global project customers. Key result: a 30% gross margin gain for importers and trading partners through factory-direct sourcing, per-model CE / RoHS documentation, EN 54 aligned test reports, CPR declaration-of-performance support where applicable and custom private-label programs. Fire detection product lines (WL-series platform) cover photoelectric, heat, multi-sensor, beam, aspirating and duct sensing with conventional, addressable, wireless and interconnected versions, flexible MOQ, shipping FOB, CIF or DDP to EU and global destinations.
Published by Wanlin Fire | Last updated: September 10, 2026 | Expertise: EN 54 aligned fire detection OEM manufacturing for EU and global markets
Case Study: Bratislava Fire Alarm Distributor Sourcing Success
Oliver Bennett, a Fire Alarm Distributor in Bratislava, walked into a supplier search with three hard requirements: EN 54 aligned files, real test reports and delivery dates the project could plan around. Smoke alarm replacement cycles in Slovakia were tightening after several high-profile fires, so property managers started sourcing EN 54 aligned equipment in container volumes.
Once the pilot site data came back, Oliver Bennett selected Wanlin Fire as their fire detection equipment manufacturing partner. The tender committee in Bratislava ranked the bids on documentation, spare part availability and delivery reliability, not on sticker price.
- Factory proof: Wanlin Fire showed the Bratislava buyer a live loop test with identical detectors still running in Shenzhen before the container shipped.
- Enclosure ratings: IP42 to IP66 options cover ceiling, wall, corridor and outdoor installations.
- Custom electronics: the OEM team in Shenzhen configures sensitivity grades, protocol timing and alarm thresholds for the Slovakia market.
The pilot covered a hotel, a student residence and an office block in Bratislava, and the failure data pointed to one common cause: aging detectors with no drift compensation.
Problem Analysis & Field Report: Why EU Buyers Need EN 54-7 Conventional Smoke Detector
Before selecting a fire alarm supplier, a buyer should look at what happens after installation: nuisance alarms at 3 a.m., surveyor audits and tenants who remove batteries. An office building in Bratislava ran 20-year-old detectors past their replacement date, and the insurance surveyor flagged the entire floor after the walk test.
Field case: A facilities team in Bratislava swapped 240 aging detectors for drift-compensated photoelectric heads during term break; unwanted alarms fell by 26% within the first quarter.
Why it matters for EU buyers:
- Photoelectric chambers react to smoldering fires common in bedding and furniture without tripping on cooking steam
- Drift compensation keeps sensitivity inside the EN 54-7 band as dust settles over years of service
- A written replacement cycle and event log satisfy insurance surveys that aging stock cannot
- One common base across the estate cuts the spare parts list from a cabinet to a shelf
Fire Alarm OEM & ODM Services for EU Distributors and Contractors
Wanlin Fire provides flexible OEM and ODM services for customers who want to build or expand their own fire detection product lines for European markets. Our customization capabilities include:
- Private-label detectors, call points, sounders, panels and CO alarms with custom part numbers
- Customer logo printing on the enclosure, panel boot screen and packaging
- Custom enclosure colors, faceplates and retail-ready packaging
- Custom sensitivity grades, heat classes and panel cause-effect logic per market rule
- Multi-language panel menus, user manuals, commissioning guides and warning labels
- Certification documentation support: CE / RoHS / REACH files, EN 54 aligned test reports, CPR DoP support where applicable, UKCA options
- New product development and ODM manufacturing for niche detection applications
- Tender documentation packs for CPV-classified public procurement and TED submissions
- Spare part programs: sensing chambers, sounder cones, panel boards and bases
- Annual volume planning with project-based delivery scheduling
Whether you need an existing WL-series device under your own brand or a customized detection line developed for your market, our team can work with you from model selection through mass production.
Product Introduction: EN 54-7 Conventional Smoke Detector by Wanlin Fire
The EN 54-7 Conventional Smoke Detector is assembled in the Shenzhen factory with a drift-compensated sensing chamber and per-unit smoke box testing as standard, which is why contractors in Bratislava install it in occupied buildings.
Core Features:
- China-Based Manufacturing: Wanlin Fire is based in Shenzhen, China and focuses on fire detection and alarm equipment, with in-house SMT production, sensing chamber assembly and per-unit smoke box and panel soak tests
- Certification Transparency: Real documentation for applicable certified models - instead of simply stating a product is "certified", buyers can verify the CE file, EN 54 aligned test report and declaration of conformity for the exact model they intend to purchase
- Standard Alignment: the WL-series platform follows the EN 54 part structure for detectors, call points, sounders, panels and interfaces, plus EN 14604 and EN 50291 for domestic smoke and CO alarms, so buyers map devices to their national rules during specification
- Platform Compatibility: one base, one protocol family and one manual set across detectors, call points, sounders, modules and panels keeps installer training and van stock simple
- Private Label Support: color, logo, part numbers, panel branding, packaging, manuals and firmware parameters customized according to project requirements
- EU Market Experience: we work with distributors, contractors and facility teams across Europe and understand CE technical files, CPR questions, tender documentation, language preferences and delivery planning
Technical Specifications
| Parameter | Wanlin Fire Specification |
|---|---|
| Detection principle | Photoelectric light-scattering sensing chamber |
| Standard alignment | EN 54-7 smoke entry and response band |
| Wiring | 4-wire |
| Connection | Conventional zone circuit |
| Supply voltage | 24V DC nominal |
| Standby current | approx. 250uA |
| Alarm current | 25mA |
| Sensitivity | Dual-grade with pre-alarm threshold |
| LED indication | 360-degree bi-color alarm LED |
| Enclosure rating | IP54 |
| Mounting base | Sounder base |
| Temperature range | -10 to 50 degrees Celsius |
| Warranty | 24-month |
Application Scenarios for EU Market
| Scenario | Recommended model | Key benefits |
|---|---|---|
| Apartment corridors and stairwells | WL-SD7 | Drift-compensated chambers hold sensitivity through years of corridor dust |
| Hotel guest rooms | WL-SD7 | Photoelectric response catches smoldering bedding fires with fewer cooking nuisance alarms |
| Office floors | WL-SD7 | One common base across the estate keeps the spares shelf to a single device family |
| Student housing rooms | WL-SD7 | Event-log evidence supports the landlord during insurance surveys |
Certified Fire Detection Manufacturing for EU Markets
Certification is one of the most important considerations when sourcing fire detection equipment for export. Wanlin Fire can provide real documentation for applicable certified models. Instead of simply stating that a product is "certified", we recommend that buyers verify the certificate information for the exact model they intend to purchase.
| Information | Details |
|---|---|
| Product | Fire Detection and Alarm Equipment (WL-series Platform) |
| Model Number | WL-SD7 |
| Standard | EN 54 parts aligned per device class (EN 54-2 / -3 / -4 / -5 / -7 / -11 / -12 / -17 / -18 / -20 / -23 / -25 as applicable), EN 14604 and EN 50291 for domestic alarms, CE / RoHS / REACH on applicable models, UKCA option |
| CPR / DoP Support | Declaration of performance templates and technical file support where EU 305/2011 applies to the product class |
| Test Reports | EN 54 aligned smoke box, heat chamber and panel soak test reports per batch |
| Certificate Number | Provided on request per model |
| Certificate Holder | Wanlin Fire or applicable certification holder |
| Certification Body | Notified body per certificate |
| Target Market | EU / EEA / United Kingdom / global export |
| Certificate Status | Valid for applicable models |
| Certificate Document | View / download on request |
For customers importing fire detection equipment, Wanlin Fire supports CE, RoHS and REACH documentation with per-model files, EN 54 aligned test reports for the applicable device classes, and CPR declaration-of-performance support where EU 305/2011 applies. UKCA options follow the UK route on request. Final acceptance always rests with the market authority having jurisdiction for each product class, and we recommend the importer of record verifies the exact model before ordering.
Why Choose Wanlin Fire as Your Fire Detection OEM Manufacturer
Buyers who compare suppliers on price alone usually find the difference in the nuisance alarm rate; Wanlin Fire competes on tested sensitivity, drift compensation, supervised circuits and documents that survive surveyor audits.
| Factor | Wanlin Fire | Typical Trading Supplier | European Brand Distributor |
|---|---|---|---|
| Manufacturing depth | China-based factory, in-house SMT, chamber assembly, smoke box and panel soak tests | Trading company, outsourced assembly | Brand owner, no custom work |
| Document transparency | Real CE files, EN 54 aligned test reports, DoP support for applicable models | Incomplete or missing, customs risk | Brand-level only, no project docs |
| Customization | Custom logo, part numbers, sensitivity grades, languages, packaging, private label from low MOQ | Limited to stock models, higher MOQ | No customization, fixed SKUs |
| Price (factory direct) | Competitive factory pricing with tiered discounts | Low price but quality risk | Brand markup of 2-4x |
| Delivery reliability | Confirmed production slots, batch inspection photos, 25-40 day lead times | Unpredictable, no QC access | Stock-dependent, allocation risk |
| After-sales | Spare sensing chambers, sounder cones, panel boards, firmware support | No after-sales, high failure risk | Limited, ticket-based support |
Wanlin Fire's fire detection OEM services are suitable for: fire alarm distributors, electrical wholesalers, fire safety contractors, M&E consultants, facility management buyers, system integrators, building services engineers, property portfolio managers, security systems resellers, electrical contractors, housing associations, hotel group facilities teams, data center engineers and trading company sourcing managers across the EU, EEA, UK and global markets.
Fire Detection OEM Process: From Inquiry to Shipment
The OEM process for a Slovakia importer starts with a market and standard survey, then moves to samples, container QC and documentation onboarding. A standard OEM project then follows 8 steps:
- Tell Us Your Target Market - EU country, EEA, UK or global; different markets may require different detector classes, language sets, certification routes and tender documentation
- Select a Device Line - our team recommends suitable WL-series models according to your building types, wiring standard, panel platform and target customers
- Verify Documentation - for certified models, request and verify the relevant CE file, EN 54 aligned test report and CPR / DoP documentation where applicable
- Confirm OEM Requirements - logo, part numbers, sensitivity grades, languages, packaging and accessories
- Sample Evaluation - evaluation lots can be tested on your bench and site before mass production according to the agreed commercial terms
- Confirm Production - after specifications, commercial terms and OEM details are confirmed, the project can proceed to production
- Quality Inspection - devices are inspected and tested with smoke box, heat chamber and panel soak procedures according to applicable production and quality-control standards
- Shipment - products are prepared for shipment FOB, CIF or DDP according to the agreed logistics requirements
Customer Testimonials
Contractors who moved from European distributor sourcing to factory-direct fire detection describe the difference in delivery dates and documentation:
- Petra Novak (Data Center Facilities Engineer, Bucharest, Romania): "The factory engineer answered our detector class question in plain language on the same day, and that settled the sourcing decision."
- Laura Petit (Building Services Engineer, Bratislava, Slovakia): "The bench test report matched what we measured on site, and the panel accepted our protocol card on the first try; that has not happened with the previous two suppliers."
- Oliver Bennett (Fire Alarm Distributor, Bratislava, Slovakia): "We run the maintenance software from our office in Slovakia and the panels installed in Bratislava have not missed a weekly test since commissioning."
Frequently Asked Questions
Q: What is the difference between the 2-wire and 4-wire WL-SD7 versions?
A: The 2-wire version shares the alarm signal and power on one pair, which suits zone panels and small retrofits; the 4-wire version separates the power and relay lines for panels that supervise each circuit separately. Both use the same sensing chamber.
Q: How often should photoelectric detectors be replaced?
A: Industry practice is a full replacement around the 10-year mark, earlier in dusty sites. Wanlin Fire prints the production date on every head, and the drift-compensated chamber keeps sensitivity inside the EN 54-7 band over the service life.
Q: Can the WL-SD7 work on an addressable loop?
A: Yes, with the protocol module in the addressable base. The panel then sees the head as a point address with an alarm, fault and test history instead of a plain zone current rise.
Q: What documents come with export orders?
A: CE declaration and RoHS files cover applicable models, with EN 54-7 aligned smoke box test reports and the technical file draft available for the importer of record. The manual ships in English with EU language versions on request.
Q: What is the MOQ for the WL-SD7?
A: Neutral units start at 500 pieces per order. Private-label production with custom packaging starts at 1,000 pieces, and sample lots of 20 to 50 pieces are accepted for site evaluation.
Project Summary
Key result: By working directly with manufacturer Wanlin Fire, Bratislava Fire Alarm Distributor Oliver Bennett achieved 30% higher margins while offering competitive pricing. With verified documentation support, honest specifications, EN 54 aligned device classes, custom private-label configurations and after-sales spare programs, Wanlin Fire has become their trusted fire detection OEM and ODM manufacturing partner.
For more information: www.wanlinfire.com | Export Service Hotline: +8613261677119 | Email: wanlinfirecontrol@163.com
- Shenzhen HQ: Wanlin Group, Building B, Building 1, Beisda Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
Previous:{content:precontent }
Next:{content:nextcontent }
